Jump to:
About
What we need to know to quote you
Sta-Lok Bottle Screws
Additional Pictures of Sailspar Standing Rigging
We use stainless steel 316 wire in 1/19, 7/19 and 7/7 as well as Dyeform wire, we can swage on site from 3mm to 10mm, we can put talurite hard or soft eyes on wires from 2mm to 5mm.
We only use stainless steel wire that has a traceable source to ensure it is of the high quality that you need for piece of mind while sailing.
We can supply and fit both Norseman, Sta-lok or Hi-Mod, we also do guard rails and all necessary fitting as well as architectural wire work.
We also offer a mast stepping service (check out the video) off site for masts between 20ft (6m) and 70ft (21m)
We can supply eye terminal, fork terminal, swage toogle fork terminals, shrawd spoon terminal, tea terminals and cappell terminals. We can also supply swageless terminals, in eyes forks, toogle forks as well as back stay insultators
What we need to know in order to quote you for standing rigging is:
the sort of boat that you have
what terminals they have on the top of the wires
what terminals they have on the bottom of the wires
and what construction it is
What we need to know to quote you for just pieces of wire:
diameter of the required wire
what wire construction you need,
what is on the top of the wire,
what is on the bottom of the wire
In most cases we can copy existing rigging if it is supplied as a pattern but the position of the bottle screws would need to be marked.
Sta-Lok Bottle screws
The proven design of the Sta-Lok Forged Bottlescrew exceeds the breaking load of today’s high strength compacted strand wire ropes.
They are Forged from high tensile Bronze alloy and have an aerodynamic design to provide strength and elegance . They are highly finished in polished chromium; they are available with a wide range of stainless steel ends to suit all rigging applications.
All Bottlescrews are available with UNF and Metric threads.
Please contact us for more information about our standing rigging |
